INSTALLATION TIPS

Atlantis Moldings may be cut, screwed and applied to surfaces as if working with a soft wood.

Helpful Hints:

• Counter sink screw heads (use dry-wall coarse thread) and fill holes using E-Z grout.


• Secure trim and panels with PL Polyurethane construction adhesive available at most hardware stores.


• Use E-Z grout for all joints.


• Most joints should be atleast 1/4 to 3/8" as typical with stone installations.


• Fill deep joints with painter's caulk or paper towels and finish coat with E-Z grout.


• Grout touch-up may be required in small areas after materials acclaimate to settling and climate conditions. (2-3 months)